Sell MC-HL Cable and Teck90 Surplus in Houston

01Identify MC-HL and Teck90 Before Requesting an Offer

MC-HL is metal-clad cable built for hazardous-location applications, including Class I, Division 1 when properly listed and installed. The construction covered here uses copper XLPE-insulated conductors with grounds, a continuous corrugated aluminum sheath and an overall PVC jacket. Teck90 is a related armored cable designation; do not assume every Teck90 reel has the same construction or hazardous-location approval.

A typical marking reads: “MC-HL 3/C 4/0 AWG CU XHHW-2 600V UL 2225.” It identifies the cable type, three circuit conductors, conductor size, copper, insulation designation, voltage rating and referenced standard. Grounds should be confirmed separately from the circuit-conductor count.

Relevant references include UL 2225, UL 1569, CSA C22.2 No. 131 for Teck90, NEC Article 330 and Chapter 5. Actual markings and listings matter—not appearance alone. Use our reel tag and jacket print guide to gather identification details. A licensed electrician or engineer should confirm installation suitability.

02Sizes, Conductor Counts and Put-Ups We Buy

We review MC-HL and Teck90 surplus in these conductor sizes: 14 AWG, 12 AWG, 10 AWG, 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1/0 AWG, 2/0 AWG, 4/0 AWG, 250 kcmil, 350 kcmil, 500 kcmil and 750 kcmil. Send the complete designation rather than just the largest conductor size.

Conductor count, grounding arrangement and voltage rating help identify the material and its potential reuse market. For mixed inventory, list each cable configuration separately. Do not combine different sizes or conductor counts into a single footage estimate; distinguish label footage from the amount remaining on a partial reel.

We buy full reels, partial reels, coils, boxes and reusable cut lengths. Original packaging helps identification, but missing packaging does not automatically rule material out. Photograph the jacket print when a tag is missing. Our surplus wire reel buying page explains the information to send for reel inventory.

03Why Reusable Hazardous-Location Cable Has Surplus Value

MC-HL and appropriately listed Teck90 cable serve demanding industrial applications and can be expensive to purchase new. A surplus reel with identifiable specifications and usable footage can retain value as cable, not simply as recoverable copper and aluminum. Reusable wire is usually worth more than its scrap, or melt, value.

Our review considers conductor metal markets, cable type and current demand, size, footage, packaging condition, manufacturer and date code. Quantity and pickup logistics also affect the written offer. Larger conductors alone do not establish value; a clearly identified, sound reel may be easier to place than damaged material with uncertain specifications.

Short remnants, burned cable, heavily damaged jackets or compromised armor may be better suited to scrap. A clean cut length can still be reusable if its length and condition support another application. We focus on reusable material and will tell you what appears suitable rather than treating every piece as resale inventory.

04Check Ends, Jacket, Armor and Reel Condition

Before moving inventory, photograph its condition where it is stored. Show both cable ends, the outer jacket, exposed armor where visible, the reel flanges and the tag. Close-ups help us distinguish superficial storage marks from damage that could affect reuse.

Include these details with your photos:

• Whether ends remain sealed or have been left open.
• Jacket cuts, crushing, burns or exposed metal sheath.
• Dents, kinks or other visible sheath damage.
• Broken flanges, loose wraps or unstable packaging.
• Manufacturer, date code and storage history, if known.

Sealed ends help limit moisture entry, but they do not prove the cable is dry or undamaged. A date code also does not establish condition by itself. Report known water exposure or handling damage honestly. Do not strip the jacket or dismantle the reel just to show the metal content; preserving the cable's existing condition gives us a better basis for evaluating reuse.

05Houston Facilities That Commonly Hold MC-HL Surplus

Ship Channel refineries and petrochemical plants commonly use hazardous-location cable. Project closeouts, revised routing and unused purchasing inventory can leave full or partial reels available for sale. Electrical contractors, industrial maintenance departments and oil-and-gas fabrication operations may also hold identifiable surplus after work is complete.

For refinery and petrochemical surplus, separate unused project stock from removed cable and damaged remnants. Storeroom tags, purchase descriptions and jacket photographs can help explain what you have, especially when several armored cable types share a storage area.

Houston Wire Buyers serves Greater Houston only: Harris, Fort Bend, Montgomery, Brazoria, Galveston, Chambers and Waller counties. Pickup is scheduled at your site. Our appointment-only drop-off address is 6402 McGrew St, Houston, TX 77087, in southeast Houston's Mayfair area near I-45 and I-610. Tell us the inventory location and access conditions so we can account for pickup logistics before scheduling.

06Sell MC-HL Cable With a Written Offer

Start by texting 951-403-5738 or emailing industrial832@gmail.com. Send clear photos of reel tags and jacket print, available footage or weight, and your Greater Houston location. Include conductor count, voltage rating and any known damage. If you have several reels, identify each one so the photos and quantities match.

We review the material and provide a written offer. After that, we schedule pickup at your site or arrange drop-off by appointment. We verify the material on site, and payment follows the written offer. Call before bringing cable to McGrew St; drop-off is not walk-in service.

If you are comparing Teck cable buyers, provide the same identification and condition information with each inquiry. Weight alone leaves out important reuse details. To request an offer for your surplus cable, share what you know and flag any estimates. Accurate information helps keep the review grounded in the actual inventory.

07MC-HL and Teck90 Compared With Related Cable Types

An overall jacket does not make different industrial cable types interchangeable. MC-HL identification includes its metal-clad construction and hazardous-location listing. Teck90 identification depends on its markings and applicable approvals. Confirm each reel individually rather than grouping everything as “hazardous-location cable.”

Tray cable is identified by its own cable designation and permitted uses; a tray-cable marking alone does not establish the same construction or approvals as MC-HL. Control cable describes a circuit application and can come in different constructions. A cable used for controls may still need more specific identification before we can evaluate it.

Instrumentation and VFD cables also require attention to conductor arrangement, shielding and jacket markings. THHN/THWN-2 generally identifies individual building-wire conductors, not the complete armored assembly discussed here. Send separate photos for mixed types. For classification, fittings, grounding and installation decisions, consult a licensed electrician or engineer rather than relying on a surplus purchase review.